Hỗ trợ trực tuyến
  • Ms.Trang - 0964 915 719(CNC miền bắc)
  • Ms.Thương - 0909 523 828(CNC miền nam)
  • Mr.Sơn - 0961 555 264(Phụ kiện quảng cáo)
  • Ms.Hiên - 0938 111 810(Linh kiện CNC, LASER)
  • Ms. Hằng - 0965 914 101 ( Linh kiện CNC, LASER


  • 1514445992
CNC Router Motor Driver DM542-DK, 1A - 4.2A, 20-50VDC hỗ trợ stepmotor 23/42/57

CNC Router Motor Driver DM542-DK, 1A - 4.2A, 20-50VDC hỗ trợ stepmotor 23/42/57

  • Introduction:
    DM542-DK is a new type of two-phase hybrid stepping motor driver, The drive voltage of which is from 20VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what‘s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.

      • High performance, low price
      • Average current control, 2-phase sinusoidal output current drive
      • Supply voltage from 20VDC to 50VDC
      • Opto-isolated signal I/O
      • Overvoltage, under voltage, overcorrect, phase short circuit protection
      • 15 channels subdivision and automatic idle-current reduction
      • 8 channels output phase current setting
      • Offline command input terminal
      • Motor torque is related with speed, but not related with step/revolution
      • High start speed
      • High hording torque under high speed
    Input voltage20-50VDC
    Input current< 4A
    Output current1.0A~4.2A
    ConsumptionConsumption:80W;  Internal Insurance:6A
    TemperatureWorking Temperature -10~45C;
    Stocking temperature -40C~70C
    HumidityNot condensation, no water droplets
    gasProhibition of combustible gases and conductive dust


Bình luận

DRIVER M542-05

950,000 ₫

Leadshine 2 phase stepper motor driver M542-05 20V-50VDC 1.0A-4.2A


1,100,000 ₫

Driver động cơ bước Leadshine MA860H