HỖ TRỢ TRỰC TUYÊN
  • Ms.Trang - 0964 915 719
  • Ms.Thương - 0909 523 828
  • Mr.Sơn - 0974 397 818
  • Ms.Hiên - 0938 111 810

Lượt xem: 534

DRIVER DM542-DK

Mã sản phẩm : 1514445992

CNC Router Motor Driver DM542-DK, 1A - 4.2A, 20-50VDC hỗ trợ stepmotor 23/42/57

950.000đ
Số lượng:

    CNC Router Motor Driver DM542-DK, 1A - 4.2A, 20-50VDC hỗ trợ stepmotor 23/42/57


    • Introduction:
      DM542-DK is a new type of two-phase hybrid stepping motor driver, The drive voltage of which is from 20VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what‘s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.

      Features:
        • High performance, low price
        • Average current control, 2-phase sinusoidal output current drive
        • Supply voltage from 20VDC to 50VDC
        • Opto-isolated signal I/O
        • Overvoltage, under voltage, overcorrect, phase short circuit protection
        • 15 channels subdivision and automatic idle-current reduction
        • 8 channels output phase current setting
        • Offline command input terminal
        • Motor torque is related with speed, but not related with step/revolution
        • High start speed
        • High hording torque under high speed
      Specification:
      Input voltage 20-50VDC
      Input current < 4A
      Output current 1.0A~4.2A
      Consumption Consumption:80W;  Internal Insurance:6A
      Temperature Working Temperature -10~45C;
      Stocking temperature -40C~70C
      Humidity Not condensation, no water droplets
      gas Prohibition of combustible gases and conductive dust
      weight 320G/pc
       

       
    •  
    •